With over 50 modern vehciles in our fleet, this shows some of our of 4x4s.
One of our demolition specification Liebherr 914 Compacts. These low ground pressure 16,5 tonne tracked excavators have zero-tail swing so can operate in confined spaces, proportional controls and two hydraulic service circuits for operating specialist attachments such as mulchers, rotating grapples and tree shears.
One of our full Arboriculture specification Mercedes Unimogs.
Another one of our full Arboriculture specification Mercedes Unimogs with TP200 Woodchipper and Kubota U20 with timber grapple.
One of our Mercedes Unimog U1200s, set up with front and rear 3 point linkage and PTO for fencing.
Our 32 tonne Scania hook-lift with forestry body.
A Botex 11 tonne trailer with 570B loader for timber forwarding and extraction.
Our Seppi BMS 125 Mulcher fitted to one of our demolition specification Liebherr 914 Compacts.
Our Igland 55 winch skidder for tricky timber extraction when doing woodland thinning.
Our 32 tonne Scania hook-lift with machinery body.
One of our two Volvo EC140 excavators loading our 32 tonne Scania hook-lift with 20 yard skip, it also has a 30 yard and 40 yard skip for bulk haulage of aggregate and woodchip.
One of our Volvo EC140s with demolition and site clearance grapple.
One of our Volvo EC140s with land rake for site clearance.
One of our Volvo EC140s with Dymax tree shear for forestry operations.
Our Volvo EC140s working together on a ground works project.
Two of our highly versatile Kubota U20 zero tail-swing excavators.
One of the Kubota U20s equipped with grapple, they also have land rakes and harrows.
Here is another Kubota U20 equipped with a vibratory post driver for Low Ground Pressure (LGP) fencing works.
An example of some of our dumpers and rollers.
Some of the Maydencroft tractor fleet.
The UK's first forestry guarded new N Series Valtra Tractor. This is an N154e with reverse drive (two steering wheels and pedals) and 54km transmission.
Our New Holland T.175 with extra fast gearbox and 2.2 tonne loader.
Two of our Landana TP200 woodchippers.
Our Spearhead Multicut 420 for large-scale grass cutting and scrub clearing operations.
One of our heavy-duty Major Cyclone forestry glade and ride mowers for scrub clearing operations.
Our Spearhead Quadsaw for hedge cutting operations.
Our Spearhead 655T telescopic side-arm hedge flail.
Some of our fleet of lawnmowers. These are Kubota 3890 Commercial out-front road registered highways mowers.
Our tracked Rayco RG35X stump grinder for tree operations.
Some of our hay making equipment in action.